Logo to embroidery digitizer

Upload your logo and get a stitch file for polos, caps and patches. Outlines and lettering become satin, areas become fills, and you can change every shape before you download. Free, with no account.

  • Free, no sign-up
  • DST, PES, JEF, EXP, VP3 and XXX
  • Edit it before you download
  • Your picture is deleted after converting
Advanced settings (optional)
mm

File formats

Loading…

Your picture is deleted as soon as it is converted. Upload only pictures you have the right to use.

Getting a logo that sews well

  • Send the cleanest version you have

    An SVG first, a PNG second, a JPG last. A vector logo is sharp at any size; a JPG has been blurred to save space and leaves marks beside every edge.

  • Size it for where it goes

    A left-chest logo is usually 90 to 100 mm wide; the front of a structured cap takes about 55 mm of height. Choose the hoop or type the width, and the form says whether your picture has enough in it.

  • Mind the small lettering

    Text is digitized as shapes. A stroke needs to be about a millimetre wide to be sewn as satin, so lettering much under 5 mm tall will not hold. The editor says which details were too small to sew, and shows where.

From logo to stitch file in three steps

01INPUT02DIGITIZE & EDIT03MACHINE EXPORT

Drop in your logo

SVG, PNG or JPG, up to 4 MB. Choose your machine under Convert to; the hoop and the most thread colours are under Advanced settings.

Check it stitch by stitch

The logo opens in the editor and sews itself on screen. Outlines and lettering are satin, areas are fills. Fix what you would have fixed by hand: a colour, an order, a shape.

Download, and sew a test

Download the file for your machine with its thread list. Sew it once on a scrap of the same cloth before the real run.

Questions about digitizing a logo

What file do I need to have my logo embroidered?

A stitch file in your machine's format: PES for Brother and Baby Lock, JEF for Janome, EXP for Bernina and Melco, VP3 for Husqvarna Viking and Pfaff, DST for Tajima and most commercial machines. If an embroidery shop is sewing it, they will almost always ask for DST. A picture file such as PNG or SVG is not enough: it has to be digitized into stitches, which is what this page does.

Can a logo with small text be digitized?

Down to a point. Lettering is sewn as satin columns, and a column needs to be about a millimetre wide, which in practice means letters about 5 mm tall or more. Smaller text is left out and the editor tells you so. Make the design larger, or leave the small line off the embroidered version, as most brands do.

Will the thread colours match my brand colours?

The design keeps your logo's own colours, and the thread list names the nearest thread to each in the chart you choose: Madeira, Isacord, Robison-Anton and some seventy others. No thread is an exact match for a colour on a screen, so hold the spool against a print before a long run.

Is an automatically digitized logo good enough for production?

For a simple, bold mark, often yes. For fine detail, small lettering or awkward cloth such as caps, piqué and fleece, expect to change things in the editor, and always sew one test on scrap cloth. A design is proved on the machine, not on the screen.